Want to Build Your Own Fence? Easy Options and Tips

Building your own fence is relatively simple, but it must be done properly. If you’re not a natural handyman, it’s a good idea to get the basic principles right and work realistically based on your skill levels. Your local fencing supplies company will be able to help with providing everything you need.
Planning your fence
Fences need to sit straight and have a clear plumb line along the fence line. (Don’t leave this step out. Your measurements only need to be slightly off over the distance of the fence to cause real problems and a lot of extra, unnecessary work.)
Mark off your fence line, and make sure it’s straight. Are there any obvious issues on the ground where putting posts are likely to be problems? Avoid hard ground, rocks, and areas with difficult access. Site your fence on clear ground where the supports won’t require major efforts.
Fencing types and DIY issues
Fencing is usually based on a system of frames and supports with stable footings in the ground.
Timber: Timber fences may be picket style or solid timber. These fences need to be assembled and installed systematically.
Steel: Steel fences are frame based, usually either pre-made pieces or steel frames with chainwire or mesh.
Colorbond fences: Single pieces, but big and need to be handled with respect when installing. It’s hard to argue with a Colorbond fence when it’s in the wrong position, so take extra care when siting your fence.
Setting it up
Supports are placed first. The average distance between posts for timber fences are 2- 3 metres. For steel, the supports need to relate to the horizontal frame edges.
Dig your supports to guarantee good stability. Try an experimental post first. The support posts should sit absolutely solid, with no movement at all. (If the supports move, they can bring down the fence over time. Just make sure you’ve got them rock solid.)
When the supports are in place, start with your fence elements. Cross beams are next, joining the supports and providing the backing, if you are using timber. Steel frames are practically self- explanatory.
The cross beams must be level and sitting straight. If out of place they put strains on the fencing body and the supports. Be patient, and make sure you’ve got a real text book setup before adding timbers.
The actual fencing materials can now be added. Check every piece to ensure they’re well fitted to the cross beams. They shouldn’t move at all.
Important: Don’t use any materials which look damaged or weak. These things will need replacing before the rest of the fence anyway, so it’s better to get it all done properly from the start.
Quality control when installing
Lay the fence systematically from one end to the other. When doing it yourself, you need to keep track of the materials as they’re assembled. Any issues in one part of the fence need to be addressed before doing the rest of the work.
If you need help
Don’t make potentially expensive guesses about your fencing installation. Your local fencing contractors will be able to help if you hit a problem.

READ  This Article Will Teach You About Furniture